Skip to content
ABN 18 637 745 290  ·  ACN 637 745 290
Build & Price

How Much Does a Shipping Container Pool Cost in Australia? (2026 Price Guide)

Short answer: our shipping container pools cost from $35,000 for a 20ft (6m), $37,900 for an 8m and $55,000 for a 40ft (12m), installed. On top of that you pay for the base the pool sits on, a compliant pool barrier and your approvals. For most finished backyard projects, that puts a 6m pool at roughly $38,000 to $50,000 all up and a 12m pool at roughly $61,000 to $85,000, depending on the site, the fencing and the options you choose. The rest of this guide shows where each dollar goes.

Prices are in Australian dollars, current as at October 2026. Figures for work done by other trades come from published Australian cost guides, which are listed at the end.

1. Our installed prices

ModelSize (approx.)Water volume (approx., 1.3m depth)Installed price from
The Plunge, 20ft6.0m x 2.4m18,500 litres$35,000
The Family, 8m8.0m x 2.4m25,000 litres$37,900
The Resort, 40ft12.0m x 2.4m37,000 litres$55,000

Every pool is fabricated at our yard in Lowood, Queensland, and installed Australia-wide. Your quote confirms the delivered price to your postcode, including any regional transport.

2. What the installed price includes

3. What we quote separately: the base

A container pool needs a level, engineered base: usually a reinforced concrete pad for pools at ground level, or engineered footings for pools set on a slope or raised on legs. We quote and build the base ourselves once we have assessed your site, because soil, slope and access change the cost far more than pool size does.

To give you a feel for it, Australian cost guides put a plain residential concrete slab at about $70 to $150 per square metre supplied and laid. At those rates, a pad for a 6m pool (about 7m x 3m, 21m²) is roughly $1,500 to $3,200, and a pad for a 12m pool (about 13m x 3m, 39m²) roughly $2,700 to $5,900. Reactive clay, poor access or a sloping block can push this up. Elevated installs need engineered footings, which are priced only after the engineering design is done.

If your switchboard does not have capacity for a new circuit, an electrical upgrade is also quoted separately. We will tell you at the site assessment.

4. Option prices

These are the same prices used in our Build and Price tool.

OptionWhat it isPrice
Deep End, 1.6mExtra depth for stronger swimmers$2,400
Split-Level SeatingBuilt-in bench and wading shelf$3,200
Composite Timber CladdingLow-maintenance timber-look exterior$4,800
Charcoal Aluminium BattenMatte black architectural cladding$5,900
Corten Weathered SteelRust-patina statement finish$7,400
Electric Heat PumpLowest running cost heating$5,500
Gas HeatingFast heat-up on demand$4,200
LED Lighting PackApp-controlled colour lighting$1,400
Smart Chlorination and FiltrationSelf-dosing, monitored from your phone$2,900
Counter-Current Swim JetsEndless-lap training current (8m and 12m only)$8,900
The Entertainer packageBench seating, umbrella mount and audio$3,900
The Resort PackGlass fencing, outdoor shower and towel rail$9,800

The standard painted steel finish is included at no extra cost.

5. Costs paid to others

Pool fencing

Every pool in Australia needs a compliant child-resistant barrier. Published 2025 to 2026 Australian prices run at about:

An above-ground container pool can sometimes use its own wall as part of the barrier, which reduces the fencing needed. Your certifier decides whether that works for your design. If you choose our Resort Pack, the glass fencing is supplied by us, and your quote shows how much of the barrier it covers.

Approvals, certification and registration

Building approval for a pool is handled by a private certifier or building surveyor, or by your council, and their fees vary too much between states and providers to give a reliable national figure. Ask two certifiers for a fixed fee. Registration costs are small by comparison: NSW pool registration is free online, and Victorian councils set their own registration fees. Our state-by-state approval guide explains each step.

Excavation and landscaping

A container pool sitting on a pad needs no digging. If you want it set partly or fully in-ground, Australian guides put pool excavation and soil removal at about $3,000 to $10,000 for a typical job, more for rock or tight access. Decking, paving, retaining walls and turf repair depend entirely on what you want around the pool.

6. Three worked examples

These use our prices plus the market ranges above. They are illustrations, not quotes.

A 6m plunge pool in a flat suburban backyard

The Plunge, 20ft, installed$35,000
Concrete pad, about 21m²$1,500 to $3,200
Aluminium pool fencing, about 18m$1,600 to $2,700
Certifier and registrationvaries, get fixed quotes
Indicative totalabout $38,000 to $41,000 plus approvals

An 8m family pool with heating and cladding

The Family, 8m, installed$37,900
Electric heat pump$5,500
Composite timber cladding$4,800
Concrete pad, about 27m²$1,900 to $4,100
Semi-frameless glass fencing, about 22m$4,400 to $11,000
Indicative totalabout $54,500 to $63,300 plus approvals

A 12m lap pool with the Resort Pack on acreage

The Resort, 40ft, installed$55,000
Electric heat pump$5,500
Charcoal aluminium batten cladding$5,900
The Resort Pack (glass fencing, shower, towel rail)$9,800
Concrete pad, about 39m²$2,700 to $5,900
Indicative totalabout $78,900 to $82,100 plus approvals and any extra fencing

7. What it costs to run each year

Running costs for a pool of 18,000 to 37,000 litres, based on published Australian estimates:

ItemPer year
Pump electricity, variable-speed$150 to $400
Pump electricity, single-speed$600 to $1,200
Chemicals and consumables$250 to $700
Water top-ups and backwashing$100 to $300
Servicing and minor parts$150 to $650
Heat pump electricity, seasonal use$400 to $1,000 extra

A DIY-maintained, unheated pool with a variable-speed pump typically comes in around $700 to $1,700 a year. A pool cover is the cheapest way to cut heating and evaporation costs. Our running costs guide goes into more detail.

8. How it compares with fibreglass and concrete

Australian guides put a small to medium fibreglass pool at about $30,000 to $90,000 installed, and a concrete pool at about $50,000 to $150,000 or more. The upper ends of those ranges include fencing and surrounds. A container pool sits at the lower end of that spread for its size, needs little or no excavation, and spends weeks in our yard rather than in your backyard. The trade-off is shape: it is always a 2.4m-wide rectangle. See our container vs fibreglass vs concrete comparison.

9. Paying for it

Many buyers use a personal or home improvement loan, or redraw on their mortgage. In 2026, advertised unsecured personal loan rates in Australia range from about 6% to over 20% a year, depending on the lender and your credit. Always compare the comparison rate, which includes most fees, rather than the headline rate. This is general information, not financial advice. Speak to a lender or broker about your situation.

10. Ways to keep the cost down

Get your exact price

Configure your pool in the Build and Price tool for an itemised quote by email, see our price list, or call +61 488 809 125 with your postcode.

Sources for third-party costs

Leave a Reply

Your email address will not be published. Required fields are marked *

Planning a container pool? Ask us about sizes, your site or delivery.